A Complete Guide To Network Cabling And Easy Installation

A Complete Guide To Network Cabling And Easy Installation

Have you ever wondered how you manage to send information from your laptop to a computer miles away? This is possible due to network cables that transfer data and information between computers, storage systems and routers. Therefore, you must always install the right kind of cabling to avoid network issues on your system.

To help you in this process, you can hire licensed electricians in Australia who can skilfully install these network cables and make sure they run smoothly in your homes.

For a better understanding on what these network cables are and how they can be installed both on your own or by an expert, read on to find out more.

Kinds Of Network Cabling

Before you understand how to install a network cable, it is essential to know the different kinds of cables and which one you should choose based on your network. There are four types of network cabling that helps you transfer data between networking systems, such as:

1. Coaxial Cable

You should use coaxial cables to transfer data, voice communications and videos within your home as it is reliable and accurate.

These cables have been in use since the early 20th century and have a shielded design that helps the copper core of this cable transmit data efficiently and quickly without getting damaged.

It would help if you got an electrician in Australia to check the cables regularly and see if they are in line with the Australian cabling standards to avoid any signal leakage that will cause fuzzy or snowy signals.

2. Fibre Optic Cable

You must have heard of fibre optic cables as these are one of the most common cables used for connecting multiple networks.

These fibre optic cables are surrounded by multiple protective layers that protect the cables from moisture and lighting.

You should use a fibre optic cable in your home if you have significant electrical interferences, as these cables are well-protected and can easily transmit network signals.

3. Shielded Twisted Pair (STP) Cable

Another kind of network cabling is the shielded twisted pair (STP) cables or more commonly known as ethernet cables.

You should use these ethernet cables in your office network as they can transfer data between large networks without any interference in the signals.

This is because this cable uses copper telephone wiring that can help increase the distance between cables and avoid any electrical current damage.

4. Unshielded Twisted Pair (UTP) Cable

The fourth type of network cabling is the Unshielded Twisted Pair (UTP) Cable which is also called ethernet cable but it is unprotected.

You can use these network cables to cancel out any noise from an external source, but they are much slower than the shielded twisted pair of cables.

Now that you have understood the four different kinds of network cabling, you can start your installation process in the following way:

Important Things To Remember

Before you start the installation process, you need to first plan the installation, keeping in mind the following pointers:

• • You should know where you are planning to connect your network cables. You can do it either through your ceilings or under your building.
  • You must make sure you don’t install the network cables near the power cables, or it could cause potential damage.
  • Calculate how many rooms you need the connection in and plan accordingly.
  • ou also need to figure out how many data points you will need in your home and get the proper hardware for each data point.

  Now that you have calculated all these factors, you will need to gather the right equipment.

  Materials Needed For Network Installation

  Here are some materials that experts who are hired for electrical services in Australia recommend for the installation process:

  • • A punch down tool with integrated wire hooks to snip and punch wires.
    • A crimping tool to join any connectors.
    • A network test tool that will test all your networks before installing any cables.
    • The network cable that you are going to use.
    • Screwdriver
    • Wall plates

    Installation Process

    Now that you have all your cabling and infrastructure in place, you can start the installation process in the following steps:

    • • You need to first start by marking the points on your wall where you will put your data plates.
      • Choose this carefully so that you don’t put a network cable near any electrical switches and components, as this could harm your cable.
      • Next, you need to cut holes in the points you have marked for your data points.
      • You must make sure you turn off all power in the building so that you don’t electrocute yourself accidentally. This is part of a major electrical safety do’s and don'ts checklist
      • You must double-check the hole measurements and you can even hire electricians in Australia to help you measure and cut these holes.
      • Next, you must start running all the cables from one hub to a data point and cut off any excess cable. Make sure that while doing this, you should wear long sleeves to protect yourself and keep all the lights off.
      • Once you have run the cable, you must strip the insulation off the cable you are using.
      • Next, you should make sure you remove both insulation levels on the cable end.
      • Now you can connect these wires to the wall terminal outlet and use your crimping tool to hold these two wires together.
      • You could keep checking your network using the test tool to see if you correctly connected the wires.
      • Now that all your wires are in place and your network is running smoothly screw your wall plates back in to cover all the network cabling and keep everything safe and secure.
      • In the last step of the network installation, you must fix one end of your cable to your router and plug the other end of the cable into the wall plate you just installed.
      • You can even hire experts trained in electrical services in Australia to help you set up your routers to make the process easier.
      • Lastly, open your network connectivity and connect to the router to get a good and fast network connection.

      Conclusion

      Once you install your network cable, you can connect several devices to your router and enjoy fast connectivity.