How To Fix A False-Triggering Motion Sensor Light

How To Fix A False-Triggering Motion Sensor Light

More and more people are opting for motion sensor lights these days because the lights enhance the safety and security of the house.

If you install the sensor-activated lighting system in your property, you won't have to worry about watching your step in the dark.  It is no secret that motion sensor lights have several benefits, but they can cause problems at times. The false triggering of the motion sensor light is one of the most common problems that homeowners often face.

If you want to fix it on your own, then you must know about the correct methods. Otherwise, it will be a complete waste of time and energy. Moreover, you can make things worse to the extent that it becomes impossible to repair.

If you do fix the issue in a stress-free and hassle-free manner, hire the best electrician in Australia. They have expertise in fixing an extensive range of electrical items, including motion sensor lights. However, if you want to try it, you need to follow some guidelines.

Read on to know more about how to fix a false-triggering motion sensor light.

Examine the Problem

If motion sensor lights are showing an unstable or rapid change in brightness, then you are dealing with something very different than false-triggering. The following reasons can be responsible for flickering lights:

• • A bad bulb
  • Poor connection between the light fixture and bulb
  • Issues within the circuit
   

  So, if your motion sensor light flickers when it's turned on, you should first attempt replacing the bulb. If this does not solve the problem, you should contact a certified electrician in Australia who will inspect the circuit and check if there is a more serious issue. They can not only fix things but can also install motion sensor lights in a stress-free manner.

  Adjust the Sensor Settings

  The sensor on most motion sensor lights is easily adjustable. When it detects a significant change in the degree of heat within eyesight (an unknown person or animal moving within its view), the sensor trips.

  If the sensor isn't properly positioned or the settings aren't perfect, it could take up heat from places it shouldn't (like the movement from branches, cars in the street, etc.). Follow the steps below to ensure that your motion lights are properly positioned and configured to meet your needs.

  • • Change the sensor's mode from 'Operational' to 'Test.' This button is situated on the sensor's bottom and turns off the light after a few seconds, allowing you to swiftly test different settings.
    • Place the sensor precisely in front of the area you want it to "protect." If you want it to detect movement within the driveway, make sure it's tilted down far enough to avoid detecting movement from the street. However, it should be high enough to prevent it from going off when the air blows through the flowers.
    • You may also look for a "range" dial on the bottom of your sensor. The distance at which your sensor will detect heat/movement is determined by this switch. Reduce the range if it's set to "max."
    • Make the necessary adjustments to the pet immunity sensors. There are some motion detectors that have a pet immunity setting to prevent the detectors from tripping when pets of a specified weight pass by. First and foremost, if you have pets (yours or even the neighbour's), make sure your sensors are on. Second, maximum pet immunity options allow you to select a weight range. Make sure yours is set to a weight that corresponds to the animals that will most likely pass across the sensor's field of vision.
    • When you done, return your sensor to "Operational" mode. It is one of those things that things your electrician wants you to know.
     

    If you have tried all of these options and your motion lights are still showing problems, try a different approach.

    Try Side Blinders

    Every motion detection light sensor has a different angle range of each. Mostly the angle ranges are between 180 and 360 degrees. However, a sensor's angle range can be too large at times, causing it to be activated by unneeded movements, such as tree branches moving.

    To restrict the range of vision of your sensors, place tiny pieces of electrical tape on one or both sides. As you experiment with different thicknesses of tape, this can be a "try and error" operation, so be sure to place your sensor in "Test" mode first.

    Contact the Reliable Professionals

    If your motion lights are still turning on and off after trying the previous troubleshooting techniques, you may have a major electrical problem. Contact a service provider in your area to take care of such a situation.

    Experienced electricians can inspect the system, identify the problem, and fix it. Simply book an appointment with the electricians, and the company will send them at the right time.

    The Bottom Line

    Fixing a false-triggering motion sensor light can be a stressful task if you don't know the right ways to tackle the problem. To manage your stress perfectly and avoid unnecessary hassles, contact reliable electricians in Australia.

    They are more than capable of sorting out any electrical problem in no time and at a reasonable price. Compare at least three to four companies before choosing one service provider.